PRENSADO DE CERÁMICA

PRENSAS HIDRÁULICAS, MOLDES, SISTEMAS DE CARGA Y ACCESORIOS

La amplia gama de prensas hidráulicas y accesorios de SACMI permite satisfacer cualquier requisito en el campo del conformado de baldosas y losas cerámicas.

  GAMA PH  GAMA PH VELOCE

CONFIGURA TU PRENSA CON LOS KITS DE VALOR AÑADIDO

ENERGY SAVING PACK

- 250,000 KWH PER YEAR OF ELECTRICITY CONSUMPTION PER PRESS

With the Energy Saving Pack kit, the main press motor is equipped with inverter. The system allows the power to be dosed at every moment of operation of the hydraulic control unit, optimising consumption during both production and stand-by phases of the press. Overall, these innovations can lead to savings in electricity consumption of up to 25% compared to a conventional solution

P.BACK ENVIRONMENT KIT

100 TONNES/YEAR OF RAW MATERIAL RECOVERY

With the optional P.Back it is possible to suck the material in the line and feed it directly back into the production cycle, avoiding waste and optimising operators' work. This function works in synergy with the recovery systems (dust filtering) with the dual result - thanks to the reduction of dustiness - of improved plant operation over time and a healthier working environment.

SELF-DIAGNOSTICS KIT

- 66% AVERAGE REPAIR TIME

SACMI offers the self-diagnostics kit as an option. In the event of fault, the machine stops and within a few minutes gives feedback to the operator on the exact type and origin of the fault. Tests on the field have shown that this system can greatly shorten the troubleshooting times, reducing downtime by more than two thirds on average, and consequently the MTTR (Mean Time To Repair).

SPE Plana

SPE Plana ejector

Device for optimising the tile moulding and ejection process

The SPE PLANA ejector is an optional that can be installed with 2450 mm gap to increase the press output at the same speed. The four independent pistons allow for maximum positioning accuracy and repeatability, guaranteeing a productivity increase of up to 60 per cent based on size.Read more

SPE PLANA

Moldes para cerámica

PE mould form ceramics

PE mould

Entering Punch Mould

Highly versatile mould ideal for single-fired, monoporosa, double-fired, and porcelain stoneware.

Mirror/Semi-entering mould for ceramics

Mirror/Semi-entering mould for ceramics

Mirror/Semi-entering mould

Mould suitable for all sizes to be squared even of considerable thickness or dimensions.

SFS mould for ceramics

SFS mould

Upper Forming Mould for ceramics

High-tech mould for ceramics. It allows the tile to be moulded and handled without any damage by constantly keeping the "good" side up.

Ceramics mould for Special Pieces

Ceramics mould for Special Pieces

Ceramics mould

Mould for the production of special pieces characterised by major plane or 3D geometric complexity.

Sistemas de carga para prensas

DCL loading systems for presses

DCL

Loading systems for industrial presses

The DCL linear filler box is characterised by outstanding reliability and accuracy, and is designed for loading traditional and porcelain stoneware products.

DGD loading systems for presses

DGD

Loading systems for industrial presses

Linear filler box with digital control unit for the coordinated unloading of decorative materials according to a graphic management program.

RPR 900  press roller collector

RPR 900

Press roller collector

It is a latest generation collector for collecting tiles coming from the press. Designed for quick mould/punch changeovers, it is adaptable to all types of mould.

Cambio rápido de molde para cerámicas

CE 45 Carriage for mould

CE 45

CE 45 mould changeover electric carriage

Electric car for safe replacement and conveying of all types of mould with max dimensions 1750x1000 mm and max weight 4500 kg, for presses with max clearance between columns of 1750 mm.

CE 75N / 100 mould carriage

CE 75N / 100

CE 75N / 100 mould changeover electric carriage

Electric car for safe replacement and conveying of all types of mould with max dimensions 2450x1450 mm and max weight 10000 kg, for presses with max clearance between columns of 2450 mm.

CE 2.160 Mould carriage

CE 2.160

Pair of CE 2.160 quick mould changeover electric carriages

Pair of electric carriages for safe replacement and conveying of all types of mould with max dimensions 2450x1800 mm and max weight 16000 kg, suitable for presses with CRS.

CE 50 T Punch carriage

CE 50 T

Maxi die punch changeover electric carriage

Electric carriage for easy, quick and safe replacement and conveying with max dimensions 2000x1300 mm and max weight 600 kg, particularly suitable for larger presses.

CRS Mould shape changeover

CRS

Quick mould changeover for Ceramics

It helps dramatically reduce the format changeover times, boosting the production flexibility of the press and consequently, of the whole line.

ACCESORIOS PARA MOLDES

Lower Universal Bases for Forming

Universal Bases for Forming

Universal Bases for Molds & Dies

The Universal base is a device which is placed between the press with its knockout and the shaped part of the die. Available in 4 different sizes according to the maxiumum depth of the format they will house, this device has become extremely useful to speed up size change-over operations thus reducing the weights to be handled and the cost of the investment when purchasing the die-sets: a universal base installed in each press can house an infinite number of different sized die-set kits. The bases are available both for dies with hideaway punches and for filler-box die-sets (mirror, SFS).

Floating Module / Monocaliber Isostatic Plate

Floating Module

Floating Module / Monocaliber Isostatic Plate

The floating modules are passive systems designed to balance the average force bearing down on each cavity of the die. These devices owe their name to the fact that the supports of the forming punches "float" on oil. Regardless of the quantity of spray-dried powder and grain size of the material in each cavity, during pressing, a spontaneous transfer of the oil takes place from the cavity where the pressure tries to rise towards cavities with a lower pressure. The result is an unprecedented degree of uniformity of the average density of the pressed material between the cavities and therefore an even level of shrinkage during firing leading to a reduction or even elimination of sorting grades.

PEM - PMP plates for moulds

Electro-Magnetic and Permanent Magnetic Plates

PEM Electro-Magnetic Plates - PMP Permanent Magnetic Plates

The top punches for die-sets with hide-away punches are always locked in place thanks to the use of magnetic plates. These are available in several sizes and differ according to the technology with which the magnetic field is generated: electric coils constantly powered for the electro-magnetic plates (PEM) or permanent magnets for the permanent magnet plates (PMP). The PEM are the traditional solution selected over the years but recently they are being gradually replaced by the PMP due to the capacity of the latter to guarantee better performance in holding the punches in a locked position under any operating conditions and due to the improved energy efficiency. The PMP require external energy only during magnetizing and de-magnetizing stages while, during the work process, no power supply is required.

LASTRINE per stampi ceramici

Plates

The plates are wear & tear parts used to form the sides of the tile. Made of special hardened steel designed for tools, these plates are available both in a whole version and in a version with rigid metal insert. The former cost less and are more convenient to use, the latter are more expensive but more robust. One or other version is chosen according to the typical formats and dimensions of the production lots.

punches

Punches

The punches are wear & tear parts which are used to form the surfaces of the tiles. They are made up of a combination of steels, metal alloy materials resistant to wear and polymers and they are among the most critical pieces of equipment of all in determining the quality of the tile surface and much of the quality of the edges.

SOLUCIONES AVANZADAS M&D

R2 DIE 2

For the first time the die is completely integrated into the production system of the ceramic plant. Thanks to the use of IOT technologies, every component acquires its own intelligence and becomes an object with a distinct identity. Data such as; what is being produced, for how long, with what level of wear and tear and for how much longer the part can perform, all represent information that can be controlled and updated with each press cycle and made available at the same time to the single component involved and to the plant central supervisor.

R2 Die

CONFIGURA TU PRENSA

Las prensas SACMI pueden equiparse con una amplia gama de soluciones para satisfacer todo tipo de necesidades de producción y de mercado.  

Configura tu PH con los nuevos kits de alto valor añadido y los accesorios 

Modelo PH VELOCE Energy Saving Pack Environment - P.Back Self-diagnostics CRS SPE Plana R2 mold
PH2090
PH2890
PH3020
PH3590
PH3800
PH5000L
PH5000XL
PH5000XXL
PH5200
PH6500
PH8200
PH10000

Download the catalogue

ARE YOU INTERESTED IN KNOWING MORE ABOUT SACMI SOLUTIONS?

Please fill-in the form below

Please read the Privacy Policy
Enter security code:
 Security code

Ruota il tuo device.