FBN

DOUBLE LAYER ROLLER KILN FOR TILES

In the FBN dual-channel kiln, adjustments, cycles and temperatures can be set independently. This makes the machine flexible ensuring low energy consumption.

Keramull KM 230

Ceramic roller for roller kiln

Standard roller, to be used for general purposes. Its mechanical properties are enhanced in hot working conditions for temperatures below 1200 °C. Recommended for preheating and cooling.

Keramull KM 250

Ceramic roller for roller kiln

Semi-technical roller, with good mechanical properties which, combined with a low vitreous percentage, make it suitable for use in all areas of the kiln.

Keramull KM 301AR

Ceramic roller for roller kiln

Technical roller, featuring excellent resistance to chemical stress. Its physical characteristics make it suitable for use even in the firing area, with medium/high loads.

Keramull KM 306 SH

Ceramic roller for roller kiln

Highly technical roller, characterised by a high elastic modulus and low porosity. Ideally used in high temperature working conditions with high loads, during pre-firing and firing.

Hyper-technical roller, it guarantees excellent material support for the production of all types of tile, 3 to 20 mm thick. Excellent thermal shock strength facilitating maintenance operations. Read more

Hyper-technical roller. The innovative production technique based on raw materials spraying and extremely high firing temperatures makes it suitable for use in maximum stress conditions. Read more

Keramull KM RR-LTE

Ceramic roller for roller kiln

Special silicon carbide-based roller for the rapid cooling area of the kiln. The product is characterized by a very low expansion coefficient, remarkable thermal conductivity and an excellent stability in case of high thermal gradient.

Vector®

Ceramic roller for roller kiln

Special, patented roller. Through the use of different peripheral speeds, it is able to realign tile feeding before the material reaches the firing area.