Isostatic pressing for ceramic products

For pressing of round and multi-edge oval and non- symmetric flat or deep ware of spray-dried porcelain granulate or similar ceramic body.
Is nowadays the most suitable and cost-effective method of producing either small or large amounts of tableware

PRESSES FOR CERAMIC TABLEWARE

ISOSTATIC PRESSING FOR CERAMICS PRODUCTS

For pressing of round and multi-edge oval and non-symmetric flat or deep ware of spray-dried porcelain granulate or similar ceramic body.
Is nowadays the most suitable and cost-effective method of producing either small or large amounts of tableware.

THE ADVANTAGES OF SAMA PRESSES

All PHO Green presses are equipped with an energy saving hydraulic system with low electrical consumption and lower cooling water requirements.

Excellent guidance of press cylinder on two tie rods to avoid any tiltings of press cylinder and tool.

SIEMENS SPS Control Board for easy programming and maintenance.

Oil tank under pressure above the machine. To avoid infiltration of air and for fast hydraulic functioning.

Press frame made of cast iron for perfect stability and vibration-free execution.

Suitable for all tool systems (vacuum or pressure filling).

PHO451 ceramic products press

isostatic press

In addition to the conventional round-shaped, non-round or multi-angular tableware items, this machine is also suitable for small and deep ceramic items, up to two moulds.

prośba o informację

LPP-1-45/OFM press for ceramic tableware

PHO700 press for ceramic tableware

isostatic press

This isostatic production system for flatware is able to produce flat structured plates, irregular-shaped soup bowls or plates with festooned lip.

prośba o informację

Technical Features	um	PHO451	PHO700
Output round flatware up to	pieces/hour	500	450
Article height	mm	max. 110	max. 150
Article diameter - unfired	mm	min. 110 – max. 380	min. 110 – max. 480
Flat plates up to	mm	max. 390	max. 410
Closing force	KN	4.500	7.000

presses

ISOSTATIC TOOLS

Made of aluminium and steel, to be installed in the isostatic press, for the forming of different article shapes and dimensions at max pressure 300 bar.

the advantages of our tools

No wear and tear parts with Netzsch tool system

Centering system for quick tool exchange

Execution of membranes and linings with adiprene or polyurethane according to complexity of articles

In-house expertise for tool design, manufacturing and tool training

Reduced amount of parts for easy manufacturing and optimization of procurement

Articles with homogeneus green density. No overpressing occurs at the rim areas

TOOL SCHEME

Lower part with membrane and upper punch parts with lining

Isostatic moulds for ceramic products

Moulds designed to have the minimum number of parts subject to wear and the utmost working precision and repeatability, with Adiprene or polyurethane membranes and linings.

tools/articles

Fettling for pressed Articles

Fettling machine to be installed in line with the isostatic press to finish the rim of the articles.

FETTLING FOR ROUND ARTICLE

RFM8 rotary table fettling system for the rim finishing of round articles equipped with 8 spindles and 6 fettling stations. Fettling is realized by grinding and sponging.

prośba o informację

OFM 8 finishing machine for ceramic tableware

FETTLING FOR NON ROUND ARTICLE

OFM8 rotary table fettling system for the rim finishing of round and non-round articles equipped with 8 spindles and 6 movable fettling stations. Fettling is realized by grinding and sponging. Self-learning system for the precise control of article contour.

prośba o informację

UNIVERSAL FETTLING WITH ROBOT

ROF Universal fettling system consisting of one to five robots with individual set-up configuration for the rim finishing of round, non-round and asymmetric articles. Fettling is realized by grinding and sponging. Easy programming and teaching of robots.

prośba o informację

FETTLING FOR PRESSED CUPS

text text

prośba o informację