PMV130

in-shell lining machine

30 punches, productivity up to 1200 closures/min, max closure diameter 46 mm, max closure height up to 24 mm.

PMV130: IN-SHELL LINING MACHINE FOR ALUMINUM caps

PRODUCTIVITY UP TO 1200 cpm

The PMV130 is a lining machine specifically design for in-shell molding of aluminum closures, up to a diameter of 46mm and a maximum height of 24 mm.
Machine productivity is strongly influenced by the type of materia used, the weight and the profile of the liner.
PMV130 can process both, PVC and PVCfree based compounds; it allows several different profiles to be made, ensuring definition of the most suitable solution in close collaboration with the customer, who can also count on further advanced testing at the Group's R&D facility.

PMV130: IN-SHELL LINING MACHINE FOR ALUMINUM caps

PMv130 IN ACTION

Have a look how PMV carries out the steps of lining process:

  • Plasticization of the granulate compound
  • Full automatic cap feeding; caps heating by a state of the art induction heating system controlled by PMV automation
  • Cut and placement of single pellets into the shell
  • Liner molding according to a specifically designed profile
  • Each cap is then inspected by the CVS153 SACMI vision inspection system, the PMV can be equipped with; inner and public side of the cap are fully inspected, leaving no area of the cap unchecked.

Video

PMv130 IN ACTION

PMV130 IS EQUIPPED WITH

  • Extrusion unit with 45 or 60 mm screw, fully controlled by PMV automation
  • Molten material by-pass valve to clean the extruder, at the time PMV starts and stops
  • Shells heating by a state of the art induction heating system, fully controlled by PMV automation, and provided of its own cooling system
  • The main cooling system allows independent temperature control of moulds and accessories
  • CVS153 vision system control quality of the inner sides
  • Optional additional camera to inspect the public side of the caps, typically decorated with lithography
  • Cap ootlet conveyor belt  ready to host a CVS153 vision system
  • Pneumatically operated faulty cap reject device
  • Outgoing cap counter with flow diverter for boxing
  • PMV130 automation is based on the TwinCAT© architecture by Beckhoff, with EtherCAT© fieldbus
This infrastructure allows process control to be pushed to levels that could not be reached before.

SACMI INSPECTION SYSTEM

The PMV130 is equipped with the CVS102 inspection system. Featuring 6 cameras and the innovative CVS360-3D inspection module, the vision system can reliably carry out full 360° inspection of the cap, both inside and out, at full line speed. More specifically, the CVS360-3D module precisely reconstructs 3D objects as 2D images, allowing for accurate inspection of sidewall decoration.

Read more

SACMI INSPECTION SYSTEM

SACMI ROPP CAPS PRODUCTION LINE: UP TO 1,200 PCS/MIN

Ruota il tuo device.