The pipes laid outside the machine optimise air flow. Load losses are lower, draft adjustment is easier and less powerful fans may be used.

With separate levels, heat distribution is even and temperature consistency is obtained on the whole load. In the event any tiles should break, they do not drop on the levels below. The side access hatches make level cleaning operations easier.

The stabilisation macro-zone controls the material outfeed temperature both in continuous operation and in stationary stages and exiting transients. The automatic adjustment assures flexibility in managing the demands of the line downstream of the dryer and allow the tiles to remain within a certain temperature range.

With the SEM system, the recirculation flow rate is adjusted by changing directly the fan rotation frequency, with appreciable reductions in the machine’s power input consumption. It is possible to enter different set-points for each recipe used, including stationary recipes (flexibility increases).

If the dryer’s feeding line generates a significant void inside the dryer, the local stationary function can be enabled, which “preserves” the product. If the line has stopped, the dryer corrects the set drying curve, with obvious reductions in fuel consumption. Electrical consumption can be optimised as well.

Some products require much care in the first stage of the drying process. The baffles, placed on the blowers, assure perfect air distribution on the product’s surface and eliminate any “scoring” effects on the material.

E7P has a modern design for high performance, thanks to which the casing limits acoustic pollution and prevent accidental contact with hot surfaces. The conventional railings have been replaced by fixed casings that increase the maintenance space. The end geometry is harmonised for the Continua+ line. Sacmi has always had an eye for the workplace. E7P has a modern design for high performance, thanks to which the casing limits acoustic pollution and prevent accidental contact with hot surfaces. The conventional railings have been replaced by fixed casings that increase the maintenance space. The end geometry is harmonised for the Continua+ line. Sacmi has always had an eye for the workplace.

The system makes it possible to manage the voids and display all inspection and routine maintenance operations required for correct operation of the dryer and relevant deadlines. The control panel has been redesigned to provide the operator with greater ease of use and straightforward management of all operation settings.